en
On/Off switch on the handpiece
The Electro hoses SES 116, SES 118 and SES 119 are equipped with a switch on the hand piece, which allows the Powerbrush to be turned on and off separately.
This allows you to vacuum without the beater bar is desired, e.g. switching from carpet to hard flooring.
Frequently asked questions
What if the Powerbrush automatically shuts off?
The vacuum has overheated. The temperature limiter automatically turns the vacuum off.
This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating.
Turn the vacuum off and pull the plug from the outlet.
Inspect the vacuum hose / wand and all filters.
It is important to allow the Powerbrush to cool off. It should be ready for use again in approx. 10 minutes.
Plug in the vacuum cleaner and switch it back on.
Maintenance and care
Removing threads and hair
Turn off and unplug the vacuum cleaner.
Use scissors to cut any threads or hair that have wound around the roller brush.
The trimmings will be vacuumed up once the vacuum is turned on again.
6
