2 Setup
2.4Choose Input Wire and Connectors
You have three choices of input connectors:
Figure 2.3 shows balanced connector pin assignments for XLR and phone. Figure 2.4 shows unbalanced connector pin assignments for XLR and phone.
Figure 2.5 shows barrier strip input wiring for a balanced signal. Both channels should be wired using a common center terminal for ground con- nection.
NOTE: Custom wiring should only be performed by qualified personnel.
Figure 2.3 Balanced Input
Connector Wiring
Figure 2.4 Unbalanced Input
Connector Wiring
Figure 2.5 Barrier Strip Input Wiring:
Balanced Signal In
Operation Manual | page 7 |