S-SeriesPower Amplifiers

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with a dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc- tions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polar- ized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com- bination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service person- nel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

16)DO NOT EXPOSE TO DRIPPING OR SPLASH- ING. DO NOT PLACE OBJECTS FILLED WITH LIQUID, SUCH AS VASES,ON THIS APPARA- TUS.

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS. NO USER SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ÀPRÉVENIR LE CHOC ÉLECTRIQUE N’ENLEVEZ PAS LES COUVERCLES. IL N’Y A PAS DES PAR- TIES SERVICEABLE À L’INTÉRIEUR. TOUS REPA- RATIONS DOIT ETRE FAIRE PAR PERSONNEL QUALIFIÉ SEULMENT.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTA- CLE. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

WATCH FOR THESE SYMBOLS:

The lightning bolt triangle is used to alert the user to the risk of electric shock.

The exclamation point triangle is used to alert the user to important operating or maintenance instruc- tions.

IMPORTANT

S Series amplifiers require Class 2 output wiring.

MAGNETIC FIELD

CAUTION! Do not locate sensitive high-gain equip- ment such as preamplifiers or tape decks directly above or below the unit. Because this amplifier has a high power density, it has a strong magnetic field which can induce hum into unshielded devices that are located nearby. The field is strongest just above and below the unit.

If an equipment rack is used, we recommend locat- ing the amplifier(s) in the bottom of the rack and the

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

page 2

Operation Manual

Page 1 Page 3
Page 2
Image 2
Crown Audio S Series operation manual Important Safety Instructions, Use only with a cart, stand, tripod, bracket, or
Page 1 Page 3

S Series specifications

Crown Audio's S Series amplifiers are renowned in the professional audio industry for their excellent sound quality, reliability, and advanced technology. Designed to meet the needs of both touring and installation applications, the S Series has gained a reputation for delivering powerful performance and exceptional value.

At the heart of the S Series is Crown's patented DriveCore technology, which integrates the power amplifier's drive and output stage into a single chip. This innovation reduces the size and weight of the amplifier while improving efficiency and thermal performance. As a result, users can expect less heat generation and the ability to drive loads with ease, ultimately leading to longer operational life and reduced energy costs.

One of the standout features of the S Series is its output power options, which offer a range of configurations to suit various applications. The amplifiers provide up to 6000 watts, ensuring that they can handle large-scale events and venues with demanding audio needs. The S Series also includes advanced signal processing capabilities, including EQ and limiting, allowing users to further refine their sound.

The S Series amplifiers are built with durability in mind. They feature rugged construction, including a steel chassis and highly-efficient internal components, making them suitable for both touring environments and permanent installations. Additionally, the amplifiers are designed for ease of use, with an intuitive front panel interface that includes LED indicators for power, signal, and thermal status.

Connectivity is another strength of the S Series. The amplifiers offer a variety of input and output options, ensuring compatibility with different audio sources and speaker systems. The built-in network capabilities allow for remote monitoring and control via Crown’s Software, enhancing flexibility and convenience in live sound scenarios or fixed installations.

The S Series amplifiers also boast a high signal-to-noise ratio and low total harmonic distortion, ensuring pristine audio reproduction. This is crucial for professional sound systems, where clarity and fidelity are paramount for delivering an exceptional listener experience.

Overall, Crown Audio's S Series amplifiers combine state-of-the-art technology, robust performance, and user-friendly features, making them a preferred choice among audio professionals worldwide. Whether for a concert, theater, or nightclub, the S Series delivers the power and reliability needed to ensure outstanding sound quality every time.
Top Page Image Contents