Keystonedistortion correction

Keystone distortion can be corrected only along either horizontal bound of the picture.

1.Press ▲▼ to select “KEYSTONE”.

POSITION

SHIFT

ASPECT

DEFAULT

 

ZOOM

 

 

CLOCK PHASE

0

 

KEYSTONE

 

 

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

• The “KEYSTONE” screen will be displayed.

KEYSTONE

KEYSTONE

0

 

SUB KEYSTONE

0

 

LINEARITY

0

 

MENU SELECT

 

 

ADJUST

 

 

3.Press ◄► to adjust the “KEYSTONE”.

The value changes from -127 to 127.

4.Press ▲▼ to select “SUB KEYSTONE” or “LINEARITY”.

5.Press ◄► to adjust “SUB KEYSTONE” or “LINEARITY”

The value changes from -127 to 127.

Note

Adjust the “SUB KEYSTONE” or “LINEARITY” after adjusting the “KEYSTONE”.

The variable range of the “SUB KEYSTONE” or “LINEARITY” changes in response to the adjusted value of the “KEYSTONE”.

“SUB KEYSTONE” is a function which is used to correct keystone distortion when the lens has been shifted to the left or right. Keystone correction can only be carried out for the area at the top-right of the screen. However, this adjustment cannot be used when “KEYSTONE” is set to “0”.

Pressing DEFAULT of the remote control will restore the factory default (“KEYSTONE”: 0, “SUB KEYSTONE”: 0, “LINEARITY”: 0).

The adjusted value is reflected in other input signals.

Keystone distortion can be corrected to ±40° of the angle of tilt for the projector against the screen. (The range for the angle of elevation is within ±22° when using a lens with a fixed focal point, and it is within ±28° when using an LE6 lens.)

Basic Operation

ENGLISH – 59

Page 59
Image 59
Panasonic PT-D10000U manual Keystonedistortion correction, Press to adjust the Keystone, Keystone screen will be displayed