Panasonic PT-D10000U, DW10000U manual Setting FUNC1, Press to select FUNC1, Press to switch FUNC1

4.Press ▲▼ to select the item to be set, and press ◄► to switch the setting.

•MAIN WINDOW:

The input terminal for the main window is displayed. The ◄► buttons can be used to select the input terminal.

SIZE: The user can specify the display size of the main window between 10 % and 100 %. POSITION: The user can specify the display position of the main window on the screen.

•SUB WINDOW:

The input terminal for the SUB WINDOW is displayed. The ◄► buttons can be used to select the input terminal.

SIZE: The user can specify the display size of the subwindow between 10 % and 100 %. POSITION: The user can specify the display position of the subwindow on the screen.

•FRAME LOCK:

The user can select the window to apply frame lock.

“MAIN WINDOW”: Frame lock is set for the input signals specified for the main window. “SUB WINDOW”: Frame lock is set for the input signals specified for the subwindow.

•TYPE:

The user can select the window that is displayed by priority when two windows overlap. “MAIN WINDOW”: The main window is displayed by priority.

“SUB WINDOW”: The subwindow is displayed by priority.

Note

•The P IN P function is not available depending on the input signals and the selected input terminals. Refer to “List of P IN P” for details. (p. 119)

•The main window’s picture adjustment values such as the picture mode, gamma selection and color temperature setting for the main window will be applied.

•In the normal screen (when the menu is not displayed), the ◄► buttons can be used to switch the size and position of the main window and subwindow when the P IN P function is on.

Setting FUNC1

The user can specify the function of the “FUNC 1” button on the remote control.

1. Press ▲▼ to select “FUNC1”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2.Press ◄► to switch “FUNC1”.

•The setting will change as follows each time ◄► is pressed.

P IN P SUB MEMORY

SYSTEM SELECTOR

•P IN P:

Enables setting of P IN P to “OFF”, “USER 1”, “USER 2”, or “USER 3. (p. 72)

•SUB MEMORY:

The sub memory can be switched. (p. 41)

•SYSTEM SELECTOR:

Allows the system selector to be switched. (p. 54)

Special Features

ENGLISH – 73