Panasonic PT-D10000U, DW10000U manual Using the remote control unit, Loading batteries

Using the remote control unit

Loading batteries

When loading supplied AA batteries into the battery compartment of the Remote Control, make sure that their polarities are correct.

1.Open battery compartment lid.

• Open the lid in the order # and then $.

$

#

2.Insert the batteries.

•Into battery compartment, with their polarities orientated as indicated ( + , – ) in the compartment.

Supplied AA batteries (insert the – side first).

3.Close the battery compartment lid.

•Replace the battery compartment lid over the compartment and slide until it clicks.

Attention

•Do not drop the Remote Control unit.

•Do not expose Remote Control unit to any liquid.

•Do not use NiCd batteries.

•Release the LOCK button before operating the remote control. (p. 13)

Effective range of remote control operation

The Remote Control should normally be aimed at either the front or rear remote control receiver window on the projector (figure 1).

The effective control range is approx. 30 metres from the beam receiver on the front or rear.

Otherwise, it may also be aimed at the screen, which will reflect commands back to the projector’s front receiver window as illustrated in figure 2.

•When the Remote Control is aimed at the screen, the effective control range may be reduced due to the optical loss by screen reflection.

Figure 1

• Top View

(Front)			(Rear)
	30°		30°
Remote	30°		30°	Remote
Control				Control
• Side View
		Remote
		Control
	30°	30°
15°
Remote 15°			15°
Control			15°	Remote
		30°	30°	Control

Remote

Control

Figure 2

ScreenProjector

Remote
	Remote Control	Remote Control
Control
	receiver window	receiver window
	(front)	(rear)

Getting Started

ENGLISH – 17