Understanding Common Operations—Continued

Muting the DVD receiver

You can temporarily mute the output of the DVD receiver.

Remote controller Press the [MUTING] button.

The output is muted and the MUTING indicator flashes on the display, as shown.

MUTING

To unmute the DVD receiver, press the [MUTING] button again, or adjust the volume.

The Mute function is cancelled when the DVD receiver is set to Standby.

Using the Sleep Timer

With the sleep timer, you can set the DVD receiver to turn off automatically after a specified period.

Remote controller Press the [SLEEP] button repeat-

edly to select the required sleep time.

The sleep time can be set from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator appears on the display when the sleep timer has been set. The specified sleep time appears on the display for about five seconds, then the previous display reappears.

If you need to cancel the sleep timer, press the [SLEEP] button repeatedly until the SLEEP indicator disappears.

To check the time remaining until the DVD receiver sleeps, press the [SLEEP] button. Note that if you press the [SLEEP] button while the sleep time is being dis- played, you’ll shorten the sleep time by 10 minutes.

Adjusting Subwoofer Level

You can adjust the level of Subwoofer during play-

back.

Remote controller Press the [SUBWOOFER LEVEL]

button, and then use the Left and Right []/[ ] buttons to adjust the volume.

You can adjust the volume of Sub- woofer from –15 dB to +12 dB in 1 dB steps.

When you’ve finished, press the [SUB- WOOFER LEVEL] button again.

32

Page 32
Image 32
Onkyo DR-S501 Understanding Common Operations, Muting the DVD receiver, Using the Sleep Timer, Adjusting Subwoofer Level