Onkyo DR-S501 instruction manual Video Output/Video Setting Matrix, Video Signal Flow Chart

Connecting the DVD receiver—Continued

Video Output/Video Setting Matrix

The following matrix shows how the video outputs work in relation to the various video settings.

					✓: Output
		HDMI Output Setting (page 29, 30)
Setting		On (default)			Off
		HD Resolution (page 30)		Progressive Setting (page 30)
Video output	Auto	480p / 576p	720p, 1080i	Progressive	Interlace
		(default)
HDMI	✓	✓	✓*3	No output	No output
Component	✓*1	✓*2	No output	✓*2	✓
Composite	✓*1	✓	No output	✓	✓
SCART*4 (European	✓*1	✓	No output	✓	✓
model only)

*1 No picture will be output from other than HDMI when you connect the TV that the native resolution is “720p” or “1080i”.

*2 If your TV doesn’t support progressive scanning, you’ll get no picture.

*3 If your TV doesn’t support the “HD Resolution” settings of “720p” and “1080i”, you’ll get no picture.

*4 With the “SCART Output Setting”, you can choose “RGB” or composite video for the SCART output. However, when HDMI is on, you cannot select “RGB”. Also, when “RGB” is selected, nothing will be output by the component video output (see page 62).

Video Signal Flow Chart

Video input signals flow through the DVD receiver as shown.

HDMI input pass through HDMI output signals as it is.

Set top box, VCR, DVD recorder, etc.

VIDEO 1	Composite	VIDEO 2/DOCK
HDMI		Composite
HDMI IN	V IN	V IN

DVD

HDMI OUT	VIDEO OUT	COMPONENT OUT	AV CONNECTOR
HDMI	Composite	Component	SCART

TV, projector, etc.

22