Onkyo DR-S501 Rear Panel,  Hdmi IN/OUT, AV Connector European model only, Video 1 Input

Front & Rear Panels—Continued

Rear Panel

    

 (1 (2 (3(4(5 (6

SPEAKERS [18]

These terminal posts are for connecting your front speakers.

HDMI IN/OUT [27]

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI input is for connecting components with HDMI outputs. The HDMI output is for connecting a TV or projector with an HDMI input.

COMPONENT VIDEO OUTPUT [24]

These jacks output component video and can be connected to an component video input on a TV or projector.

VIDEO OUTPUT [23]

This RCA connector can be used to connect a TV or projector with a composite video input.

FM ANTENNA [19]

This jack is for connecting an FM antenna.

AM ANTENNA [19]

These push terminals are for connecting an AM antenna.

AV CONNECTOR (European model only) [24]

This SCART output can be connected to a TV or projector with a SCART input. This SCART con- nector outputs 2-channel stereo audio, composite video, and RGB video.

SPEAKER IMPEDANCE SELECTOR [18]

This selector is used to select impedances of your speakers.

If the impedance of any of front speakers is 4 ohms or more but less than 6, set the speaker impedance to “4:~16:”.

OPTICAL DIGITAL AUDIO IN [26]

This optical digital audio input can be connected to an optical digital audio output on a DVD recorder, or game console.

This input is assigned for VIDEO 1 INPUT in default.

If you output audio from this input during VIDEO 2/DOCK INPUT is selected, you must change the “Video2 Input” setting to “OPT” from “Coax” (page 55).

(1 COAXIAL DIGITAL AUDIO IN [26]

This coaxial digital audio input can be connected to a coaxial digital audio output on a DVD recorder or game console.

This input is assigned for VIDEO 2/DOCK INPUT in default.

If you output audio from this input during VIDEO 1 INPUT is selected, you must change the “Video1 Input” setting to “Coax” from “OPT” (page 55).

(2 REMOTE CONTROL [26]

This (Remote Interactive) jack can be con-

nected to an jack on Onkyo RI Dock. The DVD receiver remote controller can then be used to con-

trol the RI Dock. To use , you must make an analog audio connection (RCA) between the DVD receiver and the RI Dock, even if they are connected digitally.

(3 VIDEO 1 INPUT [25]

Here you can connect other video equipment. Input jacks include composite video and analog audio input.

(4 VIDEO 2/DOCK INPUT [26]

Here you can connect Onkyo RI DOCK or other video equipment. Input jacks include composite video and analog audio input.

(5 SUBWOOFER PRE OUT [18]

A powered subwoofer can be connected here.

(6 AC INLET [28]

The supplied power cord is connected here. The other of the power cord should be connected to a suitable wall outlet.

14