Onkyo DR-S501 instruction manual Playing Discs, Starting, Pausing & Stopping Playback

Playing Discs

This chapter covers basic playback. Advanced playback functions are covered in the “Advanced Playback” on page 44.

/

1Press Open/Close [] to open the

disc tray.

DVD receiver

The input source is automatically set to

DVD.

2Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down).

3Press Open/Close [].

The disc tray closes and the relevant disc type indicator appears on the display.

Tip:

If you press the Play [ ] button, the disc tray will close and, depending on the type of disc, playback will start automat- ically.

Note:

Only load discs that are supported by the DVD receiver. See pages 8 to 10.

Starting, Pausing & Stopping Playback

This section explains how to start, pause, and stop play- back.

■ Start	To start playback, press the Play
DVD receiver	[	] button.
	Playback starts and the Play indica-
	tor appears on the display.
	If you’re playing a DVD-Video disc, or
	a VCD with PBC (Playback Control),
Remote controller	you may need to start playback from a
	menu (see page 36).
	•	For details on playing MP3, WMA,
		DivX, or JPEG picture discs, see
		pages 37 and 38.

■ Pause	To pause playback, press the
DVD receiver	Pause [ ] button.
	Playback pauses and the Pause indi-
	cator appears on the display.
	To restart playback, press the Play [ ]
Remote controller	button. Playback restarts and the Pause
	indicator disappears.
	For DVD-Audio discs, pause cannot be
	used while a menu is displayed.

33