Jacuzzi 2 Wall and 3 Wall manual Wall Tower And Curved Glass Installation, Step

3 WALL: TOWER AND CURVED GLASS INSTALLATION

STEP 1

Position the wall post so the edge of the post is set back 3/4" (19 mm) in from the finish wall.

FINISH WALL

3/4"

(19 mm)

STEP 2

Level the post in its proper position and mark where screw holes are to be drilled. Drill 3/16" holes and secure with wall anchors and screws provided. Cut a 12" strip of tape (provided) and apply firmly over screw heads.

TAPE

3 PLACES)

STEP 3

Slide the glass panel into the wall post. Make sure that the corner notch is positioned toward the base of the tower.

NOTCH

STEP 4

Place the tower onto base. Ensure the curved glass locates into the glazing channel. Install bolt but do not tighten.

BOLT (5/16")

WASHER

GLAZING

CHANNEL

19