Jacuzzi 2 Wall and 3 Wall manual Wall Tower, Fixed Wall And Curved Glass Installation, B, Step

2 WALL: TOWER, FIXED WALL AND CURVED GLASS INSTALLATION

STEP 1

Position the wall posts so the edge of the post is set back 3/4" (19 mm) in from the edge of the base

STEP 3A

Slide straight glass panel all the way into wall post. Mark position of glass post. Remove panel.

3/4"

(19 mm)

FINISH WALL

EDGE OF BASE

STEP 2

Level both wall posts in their proper position and mark where screw holes are to be drilled. Drill 3/16" holes and secure with wall anchors and screws provided. Cut a 12" strip of tape (provided) and apply firmly over screw heads.

TAPE

6 PLACES)

MARK POSITION

STEP 3B

Apply a bead of silicone sealant on underside of bottom bracket corner post and place bracket where marked. Drill pilot holes (#8 screw) and secure bracket to base. Reinsert panel into wall post and position glass post over bracket.

APPLY BEAD OF

SILICONE SEALANT

ON UNDERSIDE OF

BOTTOM BRACKET

CORNER POST

8