Jacuzzi 2 Wall and 3 Wall manual Secure the rails Install cover cap on wall post

3 WALL: TOWER AND CURVED GLASS INSTALLATION

STEP 9	STEP 11
Secure the rails.	Install cover cap on wall post.

COVER CAP

STEP 10

Tighten the tower base bolt. Two shut-off valves are provided. To hook up supply lines, unscrew valves from braided line. Using thread sealant, screw valve to stub outs at bottom of tower. Then reconnect braided line using provided gasket. Do not twist or kink supply lines when connecting.

STEP 12

Install glazing gasket on curved glass wall post on the outside. Note orientation of gasket. Soapy water may help to insert the glazing gasket. On the inside of enclosure, apply sealant the entire length of glass and wall post as well as the entire length of glass and tower.

COLD

SHUT OFF
VALVES
(PROVIDED)	GLASS

WALL POST	INSIDE OF
	ENCLOSURE
HOT
BOLT
GLAZING GASKET	APPLY SEALANT

GLAZING

GASKET

TOWER TOP PLATE

APPLY

SEALANTINSIDE OF

ENCLOSURE

21