Chapter 2 Alarm Troubleshooting

Alarm Procedures

A Facility Termination Equipment Receiver Missing (RCVR-MISS) alarm occurs when the facility termination equipment detects an incorrect amount of impedance on its connector. Incorrect impedance usually occurs when a receive cable is missing from the XTC DS-1 port or a possible mismatch of equipment occurs.

Warning Invisible laser radiation might be emitted from the end of the unterminated fiber cable or connector. Do not stare into the beam directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100

mmmight pose an eye hazard. Use of controls or adjustments or performance of procedures other than those specified might result in hazardous radiation exposure.

Note DS-1s are four-wire circuits and need a positive (tip) and negative (ring) connection for both transmit and receive.

Caution Always use the supplied electrostatic discharge wristband when working with a powered ONS 15327. Plug the wristband cable into the ESD jack located between the top high-speed and XTC slots.

Procedure: Clear the RCVR-MISS Alarm

Step 1 Ensure that the device attached to the XTC port is operational.

Step 2 If the attachment is correct, verify that the cabling is securely connected.

Step 3 If the cabling is correct, verify that the pinouts are correct.

Step 4 If the pinouts are correct, replace the receive cable.

Step 5 If the alarm does not clear, log onto http://www.cisco.com/tac for more information or call TAC to report a service-affecting problem (1-800-553-2447).

2.6.142 RFI-L

Not Reported (NR), Non-Service Affecting (NSA)

A Remote Fault Indication (RFI) Line condition occurs when the ONS 15327 detects an RFI in the SONET overhead because of a fault in another node. Resolving the fault in the adjoining node clears the RFI-L condition in the reporting node. RFI-L indicates that the condition is occurring at the line level.

Procedure: Clear the RFI-L Condition

Step 1 Log into the node at the far-end node of the reporting ONS 15327.

Step 2 Verify whether there are other alarms, especially an LOS (OC-N) alarm (see page 2-84).

Step 3 Clear the alarms; to clear an LOS (OC-N) alarm (see page 2-84), refer to the LOS section in this chapter.

 

 

Cisco ONS 15327 Troubleshooting Guide, R3.4

 

 

 

 

 

 

March 2004

 

 

2-101

 

 

 

 

 

Page 207
Image 207
Cisco Systems ONS 15327 manual Rfi-L, Procedure Clear the RCVR-MISS Alarm, Procedure Clear the RFI-L Condition, 101

ONS 15327 specifications

Cisco Systems ONS 15327 is a high-performance optical networking solution tailored for service providers and enterprises looking to enhance their optical communication infrastructure. This versatile platform is recognized for its robust performance, scalability, and flexibility, making it suitable for a wide array of applications ranging from broadband access to metropolitan area networking.

One of the standout features of the ONS 15327 is its ability to handle multiple data types over a single platform. It supports a rich array of protocols, including Ethernet and SONET/SDH, allowing service providers to deliver a diverse portfolio of services to their customers. This multiservice capability simplifies the network architecture, reducing operational complexity and costs.

The ONS 15327 is designed with a modular architecture, which enables operators to customize and scale their network as demand grows. It supports a variety of card options for different media types, wavelengths, and capacity requirements. This modularity not only facilitates straightforward upgrades but also allows for efficient network management.

In terms of technology, the ONS 15327 leverages dense wavelength division multiplexing (DWDM) capabilities to maximize the utilization of available fiber bandwidth. This allows for an impressive increase in transmission capacity without the need for additional fiber installations, making it a cost-effective solution for expanding networks.

Another significant characteristic of the Cisco ONS 15327 is its advanced performance monitoring and management features. Built-in diagnostic tools provide real-time visibility into network performance, enabling prompt identification and troubleshooting of potential issues. This proactive approach to network management enhances service reliability and customer satisfaction.

Security is also paramount in the ONS 15327. The platform integrates various security features and protocols to protect the data traversing the network, ensuring compliance with industry standards and safeguarding sensitive information.

Furthermore, the equipment is designed for easy integration into existing infrastructures. Its compatibility with Cisco’s broader networking solutions allows for seamless interconnection with routers, switches, and other devices, facilitating comprehensive network solutions.

In conclusion, Cisco Systems ONS 15327 stands out as a powerful optical networking platform that combines versatility, scalability, and advanced management features. Its ability to support various protocols and harness optical technologies makes it an essential tool for organizations aiming to optimize their telecommunications infrastructure while minimizing costs and complexity.