Selecting either HI-FI L or HI-FI R, Played back | JVC LPT0641-001A

EN 75

VHS MODE SET (cont.)

* The default setting is bold in the table below.

8 VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical vibration
ON	in the picture when playing back unstable recordings made on another VCR.
OFF	NOTES:
	NOTES:
	● When you finish viewing a tape, be sure to set this function to “OFF”.
	● Regardless of the setting, this function has no effect during recording and during special effects
	playback.
	● The on-screen display may jitter vertically when this function is set to “ON”.
	● To watch recordings with close-caption, set this function to “OFF”.
	● Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate Digital
	TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically
	turned “OFF”.

8 DIGITAL R3	When this function is set to “ON”, the Digital R3 picture system applies edge
ON	correction to the luminance signal to enhance details.
OFF	NOTES:
	NOTES:
	● Normally it is recommended to keep “DIGITAL R3” set to “ON”.
	● Depending on the type of tape being used, picture quality may be better with “DIGITAL
	R3” set to “OFF”.
	● If you use the VCR as the source player for editing, be sure to set “DIGITAL R3” to “OFF”
	before starting.

8 AUDIO MONITOR	This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi
HI-FI	stereo tape. You can select the sound track(s) to listen to while playing back a Hi-Fi
HI-FI L	stereo tape. In addition, when playing back a prerecorded tape containing two
HI-FI R	separate audio programs on the Hi-Fi tracks, you can choose either one by
NORM	selecting either “HI-FI L” or “HI-FI R”.
MIX	HI-FI:	Normally select this. Hi-Fi sound is played back.
	HI-FI:	Normally select this. Hi-Fi sound is played back.
	HI-FI L:	Sound on the left Hi-Fi channel is played back.
	HI-FI R:	Sound on the right Hi-Fi channel is played back.
	NORM:	Sound on the normal track is played back.
	MIX:	Both sounds on the Hi-Fi track and normal track are mixed and
		played back.
	NOTES:
	● While playing back a monaural tape, sounds on the normal track will be heard regardless of
	this setting.
	● You can also use the A. MONITOR button on the Remote to select the desired monitor
	sound. ( pg. 31)

Image 75

JVC LPT0641-001A Correction to the luminance signal to enhance details, Selecting either HI-FI L or HI-FI R, Played back

Contents

For Customer Use Video Cassette Recorder Moisture Condensation Dear Customer Important Product Safety Instructions Replacement Parts AccessoriesCleaning Damage Requiring Service Contents Front View Rear View Front Display Panel Remote How To Use Press DISPLAY/OSD 10 ENON-SCREEN Display for VHS deck To recall an indication ON-SCREEN Display for DV deck Situate the VCR Check the contentsConnect the VCR to power source 12 EN Video Connection 8To connect to a TV with S-VIDEO/AUDIO input connectors 14 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play Set Language Preparations Access the Clock Set screenClock Set 16 EN Manual Clock Set Semiauto Clock Set Auto Channel Set Access the Tuner Set screenTuner Set 18 EN To skip channels Manual Channel SetAdd or skip the desired channels To add channels 20 EN Installing Controller If you do not use a cable box, press rt until OFF Access the Cable Box Set screenTurn on the cable box Select the cable box’s channel If the cable box’s channel does not change to 22 ENEnter the cable box’s brand Press OK or e If your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver If you do not use a DBS receiver, press rt until OFF Setting DBS receivers brand and channelTurn on the DBS receiver Select the DBS receiver’s channel If the DBS receiver’s channel does not change as shown above Enter the DBS receiver’s brand Basic Playback 26 ENVHS deck Pause/Resume recording Choose a programSet the tape speed Start recording Activate frame-by-frame playback 28 ENSlow Motion On the VCR Pause during playback Variable Speed Search On the Remote Slow Motion On the Remote Next Function Memory 30 ENIndex Search Repeat Playback Override automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection Instant Timer Recording ITR 32 ENRecord One Program While Watching Another Set the counter display Reset the counterPress C.RESET before starting recording or playback Tape Remaining Time 34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording Press DV 36 ENDV deck Select the DV deck DV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Select the deck Access the PlusCode No. screenAccess the VCR Plus+ Program screen 42 EN Cable Box or DBS Receiver Users Engage the VCR’s timer modeFor the VHS deck For the DV deck Enter the Guide Channel number Access the Guide Channel Set screen44 EN Guide Channel Number Set Enter the receiving channel position number Guide Channel Number 46 EN Express Timer Programing Press CH+ Enter the program dateEnter the channel position Press DATE+ Set the program start/stop time and channel Enter the program mode24HR Quick Programing 48 ENPage Return to the timer mode Disengage the timer modeAccess the Program Check screen Cancel or change a program Overlapping programs blink on the TV screen Cancel or change program settingConfirm the overlapping programs Select the program to modify Dubbing An Entire Cassette Tape Dubbing52 EN From DV to VHS Press DV, then press SP/LP p From VHS to DV Pause dubbing 54 ENLocate the start point on the DV deck Prepare the VHS deck for dubbing Prepare the DV deck for dubbing Locate the start point on the VHS deck 56 EN Player Recorder Start the recording deck Set the input mode of recording deck58 EN Start the source player Connection to another VCR Connection to a PC with DV connectorExample When using this VCR as the source player PC with DV connector DV Audio Dubbing Audio Dubbing60 EN VHS Audio Dubbing Engage the Audio Dubbing mode End Audio DubbingPress A.DUB Source tape Insert Editing62 EN VHS Insert Editing Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassette Press R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screen64 EN Select the program End Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble Editing To control two VCRs with the same Remote Remote A/B Code Switching66 EN Change the code for VCR Before performing the following steps TV Multi-Brand Remote ControlSet the TV brand code Operate the TV Operate the Cable Box Press the corresponding button Power68 EN Set the Cable Box brand code DBS Receiver Multi-Brand Remote Control Set the DBS receiver brand codeOperate the DBS receiver Select the mode setting Mode SetAccess the Mode Set screen Select the mode When this function is set to on Mode SET 72 EN VHS Mode SET VHS Mode SET For Example 74 EN Sound on the left Hi-Fi channel is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Normally select this. Hi-Fi sound is played back 76 EN DV Mode SET Power Recording 78 EN DV deck VHS deck 80 EN Timer Recording Timer Recording PlaybackRecording 82 EN VCR Plus+ Timer Programing Cable box Cable Box Control SettingChanging VCR Plus+ Setting Express Timer Programming 84 EN HOW to Locate Your JVC Service Center Warranty Only in U.S.A 86 EN