![](/images/new-backgrounds/1201521/20152195x1.webp)
48 EN | TIMER RECORDING (cont.) |
24HR Quick
Programing
Before performing the 24HR Quick Programing:
●Make sure that the VCR’s
●Select the deck.
●Set the tape speed.
●For the VHS deck:
Insert a VHS (or
For the DV deck:
Insert a Mini DV cassette with the erase protection switch set to “REC”.
You can program a timer recording that starts within 24 hours using the ADVANCED JOG dial on the VCR.
A Enter the program mode.
Press 24HR QUICK PROGRAM on the VCR. The start time indicator ( ) starts blinking on the front display panel.
B Set the program start/stop time and channel.
Turn the ADVANCED JOG dial to the left or right to set the time you want recording to start.
●One click stop of the ADVANCED JOG dial changes the time in
1 | 3 | 2 |
Push the ADVANCED JOG dial. The stop time indicator ( ) starts blinking on the front display panel. Turn the ADVANCED JOG dial to the left or right to set the time you want recording to stop.
Push the ADVANCED JOG dial. Turn the ADVANCED JOG dial to the left or right to select the channel you wish to record.
●You can cancel the setting at any time by pressing and holding the ADVANCED JOG dial for more than 3 seconds or pressing CANCEL on the Remote. Repeat the step 2.
C Engage the VCR’s timer mode.
Press 24HR QUICK PROGRAM. The VCR turns off automatically and “#” appears on the front display panel.
●To disengage the timer mode, press TIMER or 24HR QUICK PROGRAM again.