JVC LPT0641-001A manual 56 EN

56 EN EDITING (cont.)

Edit From A Camcorder

1 3 2

T W

1 2 3

2

4 5 6

7 8 9

04

1 DV S-VHS

You can use a camcorder as the source player and your VCR as the recording deck.

You can perform digital dubbing if you connect a device such as a camcorder which has a DV IN/OUT connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

A Make connections.

AIf the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the VCR’s front panel AUDIO and VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and S-VIDEO OUT connectors to the VCR’s front panel AUDIO and S-VIDEO input connectors.

CIf the camcorder has a DV IN/OUT connector ...

... connect the camcorder’s DV IN/OUT connector to

the VCR’s DV IN/OUT connector.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your VCR.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the VCR. Refer to the camcorder’s instruction manual for operating procedure.

B Set the VCR’s input mode.

Press AUX (number key “0”) and/or CH +/– to select “F-1”.

F-1:when connecting the camcorder to the audio/video input connectors or DV IN/OUT connector on the front panel.

●When using S VIDEO connector, set “FRONT AUX INPUT” to “S-VIDEO”. ( pg. 73)

●When using VIDEO connector, set “FRONT AUX INPUT” to “VIDEO”. ( pg. 73)

C Select the recording deck.

Press S-VHSor DV.

●To edit from a camcorder to the VHS deck through the DV IN/ OUT connector, press .

●To edit from a camcorder to the DV deck through the S-VIDEO (VIDEO)/AUDIO input connectors, press .

D Set the edit mode. (VHS deck only)

See “PICTURE CONTROL” on page 73.

E Start the camcorder.

Engage the Play mode of the camcorder.

F Start the VCR.

Engage the Record mode of the VCR.