40 EN, Next Function Memory | JVC LPT0641-001A manual

40 EN

PLAYBACK/RECORDING ON DV DECK (cont.)

1

3

2

T

W

1 2 3

2

4 5 6

7 8 9

04

1				DV				S-VHS

Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, make sure the VCR is in the Stop mode.

a- For Automatic Start Of Playback

Press REW (3), then press PLAY (4) within 2 seconds.

b- For Automatic Power Off

Press REW (3), then press POWER within 2 seconds.

c- For Automatic Cassette Ejection After Tape Rewind Press REW (3), then press EJECT () within

2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set to “ON” (☞ pg. 71) and if any timer programing has been made. If “AUTO TIMER” is set to “ON”, the VCR directly goes into the Timer-Standby mode at the same time when the POWER is pressed for the Automatic Power Off.

Soundtrack Selection

Your VCR is capable of recording two soundtracks (L and R) and will play back the one you select.

During Playback

Pressing A. MONITOR changes the soundtrack as follows:

	TRACK	USE

	On-Screen Display
	On-Screen Display

		Both sounds on the left channel and
	L+R	the right channel are mixed and
		played back

	L	Sound on the left channel is played
	L	back
		back

	R	Sound on the right channel is
	R	played back
		played back

NOTE:

“SUPERIMPOSE” must be set to “ON” or the on-screen displays will not appear (☞ pg. 71).

Image 40

JVC LPT0641-001A manual 40 EN, Next Function Memory

Contents

Video Cassette Recorder For Customer Use Dear Customer Moisture Condensation Important Product Safety Instructions Accessories CleaningDamage Requiring Service Replacement Parts Contents Front View Rear View Front Display Panel How To Use Remote 10 EN ON-SCREEN Display for VHS deckTo recall an indication Press DISPLAY/OSD ON-SCREEN Display for DV deck Check the contents Connect the VCR to power source12 EN Situate the VCR 8To connect to a TV with S-VIDEO/AUDIO input connectors Video Connection Perform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 14 EN Language Access the Clock Set screen Clock Set16 EN Preparations Semiauto Clock Set Manual Clock Set Access the Tuner Set screen Tuner Set18 EN Auto Channel Set Manual Channel Set Add or skip the desired channelsTo add channels To skip channels Installing Controller 20 EN Access the Cable Box Set screen Turn on the cable boxSelect the cable box’s channel If you do not use a cable box, press rt until OFF 22 EN Enter the cable box’s brandPress OK or e If the cable box’s channel does not change to How to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver Setting DBS receivers brand and channel Turn on the DBS receiverSelect the DBS receiver’s channel If you do not use a DBS receiver, press rt until OFF Enter the DBS receiver’s brand If the DBS receiver’s channel does not change as shown above 26 EN Basic PlaybackVHS deck Choose a program Set the tape speedStart recording Pause/Resume recording 28 EN Slow Motion On the VCRPause during playback Activate frame-by-frame playback Slow Motion On the Remote Variable Speed Search On the Remote 30 EN Index SearchRepeat Playback Next Function Memory Adjust the tracking manually Manual TrackingSoundtrack Selection Override automatic tracking 32 EN Instant Timer Recording ITRRecord One Program While Watching Another Reset the counter Press C.RESET before starting recording or playbackTape Remaining Time Set the counter display Retake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording 36 EN DV deckSelect the DV deck Press DV DV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Access the PlusCode No. screen Access the VCR Plus+ Program screen42 EN Select the deck Engage the VCR’s timer mode For the VHS deckFor the DV deck Cable Box or DBS Receiver Users Access the Guide Channel Set screen 44 ENGuide Channel Number Set Enter the Guide Channel number Guide Channel Number Enter the receiving channel position number Express Timer Programing 46 EN Enter the program date Enter the channel positionPress DATE+ Press CH+ Enter the program mode 24HR Quick Programing48 EN Set the program start/stop time and channelPage Disengage the timer mode Access the Program Check screenCancel or change a program Return to the timer mode Cancel or change program setting Confirm the overlapping programsSelect the program to modify Overlapping programs blink on the TV screen Tape Dubbing 52 ENFrom DV to VHS Dubbing An Entire Cassette From VHS to DV Press DV, then press SP/LP p 54 EN Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbing Locate the start point on the VHS deck Prepare the DV deck for dubbing 56 EN Recorder Player Set the input mode of recording deck 58 ENStart the source player Start the recording deck Connection to a PC with DV connector Example When using this VCR as the source playerPC with DV connector Connection to another VCR Audio Dubbing 60 ENVHS Audio Dubbing DV Audio Dubbing End Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing 62 ENVHS Insert Editing Source tape Engage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start Editing Access the R.A.Edit screen 64 ENSelect the program Press R.A.EDIT. The R.A.Edit screen appears Locate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble Editing Remote A/B Code Switching 66 ENChange the code for VCR To control two VCRs with the same Remote TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Before performing the following steps Press the corresponding button Power 68 ENSet the Cable Box brand code Operate the Cable Box Set the DBS receiver brand code DBS Receiver Multi-Brand Remote ControlOperate the DBS receiver Mode Set Access the Mode Set screenSelect the mode Select the mode setting Mode SET When this function is set to on VHS Mode SET 72 EN VHS Mode SET 74 EN For Example Correction to the luminance signal to enhance details Selecting either HI-FI L or HI-FI RNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played back DV Mode SET 76 EN Power 78 EN Recording VHS deck DV deck Timer Recording 80 EN Playback Timer RecordingRecording 82 EN Cable box Cable Box Control Setting Changing VCR Plus+ SettingExpress Timer Programming VCR Plus+ Timer Programing HOW to Locate Your JVC Service Center 84 EN Warranty Only in U.S.A 86 EN