JVC LPT0641-001A manual Express Timer Programing, 46 EN

46 EN TIMER RECORDING (cont.)

Express Timer

Programing

If you do not know the PlusCode number for the program you wish to record, use the following procedure to set your VCR to timer-record the program.

Before performing Express Timer Programing:

●Make sure that the VCR’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

T	W	3
1	2
		2
4	5	6
7	8	9
	0	4
1	DV	S-VHS

A Turn on the VCR.

Press POWER.

B Load a cassette.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

C Select the deck.

Press S-VHSor DV.

D Access the PlusCode screen.

Press PROG.

E Access the Program screen.

Press START+/–. (If you’re just starting out and you have selected the VHS deck, “VHS PROGRAM 1” appears.)

F Enter the program start time.

Press START+/– to enter the time you want recording to start.

● Press and hold START+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

G Enter the program stop time.

Press STOP+/– to enter the time you want recording to stop.

●Press and hold STOP+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.