54 EN, Locate the start point on the DV deck | JVC LPT0641-001A

54 EN

EDITING (cont.)

Normal Dubbing

(from DV to VHS)

1

3

2

T

W

1 2 3

2

4 5 6

7 8 9

04

1

DV

S-VHS

NOTES:

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●To cancel the dubbing mode, press CH +/– so that the dubbing direction indicator (DV ) goes off.

●When dubbing a Mini DV tape that was produced by audio

dubbing, you need to set “12BIT MODE” to the appropriate mode before playing back the tape. ( pg. 76)

You can dub selected scenes on a tape, starting and stopping wherever you wish.

A Load cassettes.

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety tab intact, or cover the hole using adhesive tape.

For the DV deck

Insert a Mini DV cassette with the erase protection switch set to “SAVE”.

B Select the dubbing direction.

Press .

●The dubbing direction indicator (DV ) lights.

C Set the tape speed.

Press S-VHS, then press SP/EP (p).

●“DV ] VHS” appears on the TV screen if “SUPERIMPOSE” is set to “ON”. ( pg. 71)

D Locate the start point on the DV deck.

APress DV.

BPress PLAY (4) to start playback.

CPress PAUSE (9) to pause playback a little before the start point.

E Prepare the VHS deck for dubbing.

APress S-VHS.

BPress and hold PAUSE (9) and press REC (7) so that

the VHS deck enters the Record Pause mode.

●DV playback indicator and VHS recording indicator light.

F Start dubbing.

Press START.

G Pause dubbing.

Press START.

●The VHS deck enters the Recording Pause mode, then the DV deck enters the Dubbing Pause mode.

H End dubbing.

Press STOP (8) to stop recording on the VHS deck. Then press DV and press STOP (8) to stop playback on the DV deck.

Image 54

JVC LPT0641-001A manual 54 EN, Locate the start point on the DV deck, Prepare the VHS deck for dubbing, Pause dubbing

Contents

Video Cassette Recorder For Customer Use Dear Customer Moisture Condensation Important Product Safety Instructions Damage Requiring Service AccessoriesCleaning Replacement Parts Contents Front View Rear View Front Display Panel How To Use Remote To recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSD ON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCR 8To connect to a TV with S-VIDEO/AUDIO input connectors Video Connection Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 EN Language 16 EN Access the Clock Set screenClock Set Preparations Semiauto Clock Set Manual Clock Set 18 EN Access the Tuner Set screenTuner Set Auto Channel Set To add channels Manual Channel SetAdd or skip the desired channels To skip channels Installing Controller 20 EN Select the cable box’s channel Access the Cable Box Set screenTurn on the cable box If you do not use a cable box, press rt until OFF Press OK or e 22 ENEnter the cable box’s brand If the cable box’s channel does not change to If your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFF Enter the DBS receiver’s brand If the DBS receiver’s channel does not change as shown above Basic Playback 26 ENVHS deck Start recording Choose a programSet the tape speed Pause/Resume recording Pause during playback 28 ENSlow Motion On the VCR Activate frame-by-frame playback Slow Motion On the Remote Variable Speed Search On the Remote Repeat Playback 30 ENIndex Search Next Function Memory Soundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic tracking Instant Timer Recording ITR 32 ENRecord One Program While Watching Another Tape Remaining Time Reset the counterPress C.RESET before starting recording or playback Set the counter display 34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording Select the DV deck 36 ENDV deck Press DV DV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code 42 EN Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deck For the DV deck Engage the VCR’s timer modeFor the VHS deck Cable Box or DBS Receiver Users Guide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel number Guide Channel Number Enter the receiving channel position number Express Timer Programing 46 EN Press DATE+ Enter the program dateEnter the channel position Press CH+ 48 EN Enter the program mode24HR Quick Programing Set the program start/stop time and channelPage Cancel or change a program Disengage the timer modeAccess the Program Check screen Return to the timer mode Select the program to modify Cancel or change program settingConfirm the overlapping programs Overlapping programs blink on the TV screen From DV to VHS Tape Dubbing52 EN Dubbing An Entire Cassette From VHS to DV Press DV, then press SP/LP p Prepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbing Locate the start point on the VHS deck Prepare the DV deck for dubbing 56 EN Recorder Player Start the source player Set the input mode of recording deck58 EN Start the recording deck PC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCR VHS Audio Dubbing Audio Dubbing60 EN DV Audio Dubbing Engage the Audio Dubbing mode End Audio DubbingPress A.DUB VHS Insert Editing Insert Editing62 EN Source tape Prepare the recording cassette Engage the Insert Editing modeAV Insert Editing VHS deck only Start Editing Select the program Access the R.A.Edit screen64 EN Press R.A.EDIT. The R.A.Edit screen appears Start Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble Editing Change the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same Remote Operate the TV TV Multi-Brand Remote ControlSet the TV brand code Before performing the following steps Set the Cable Box brand code Press the corresponding button Power68 EN Operate the Cable Box DBS Receiver Multi-Brand Remote Control Set the DBS receiver brand codeOperate the DBS receiver Select the mode Mode SetAccess the Mode Set screen Select the mode setting Mode SET When this function is set to on VHS Mode SET 72 EN VHS Mode SET 74 EN For Example Normally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played back DV Mode SET 76 EN Power 78 EN Recording VHS deck DV deck Timer Recording 80 EN Timer Recording PlaybackRecording 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting VCR Plus+ Timer Programing HOW to Locate Your JVC Service Center 84 EN Warranty Only in U.S.A 86 EN