EN 53

Tape Dubbing

(from VHS to DV)

1

3

2

T

W

1 2 3

2

4 5 6

7 8 9

04

1

 

 

 

DV

 

 

 

S-VHS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dubbing An Entire Cassette

Because this VCR includes both VHS deck and DV deck, you can easily use it for dubbing without connecting any other equipment.

A Load cassettes.

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety tab removed.

For the DV deck

Insert a Mini DV cassette with the erase protection switch set to “REC”.

B Select the dubbing direction.

Press .

The dubbing direction indicator ( S-VHS) lights.

C Set the tape speed.

Press DV, then press SP/LP (p).

“VHS ] DV” appears on the TV screen if “SUPERIMPOSE” is set to “ON”. ( pg. 71)

D Start dubbing.

Press DUB for more than 2 seconds.

VHS playback indicator and DV recording indicator light.

If the tapes have not been rewound, both decks rewind automatically. The DV deck goes into Record Pause mode, and the VHS deck goes into Pause mode.

When both decks have finished rewinding, dubbing begins automatically.

After dubbing is completed, the decks rewind both tapes automatically and eject them. The VCR then shuts off.

NOTES:

If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.

If you start dubbing a tape from a tape with a copy protection signal, the tapes will be automatically ejected, and the VCR will turn off.

To cancel the dubbing mode, press CH +/– so that the dubbing direction indicator ( S-VHS) goes off.

Page 53
Image 53
JVC LPT0641-001A manual From VHS to DV, Press DV, then press SP/LP p