Smooth Fitness UB4 user manual Install Computer, Install Seat, Install Pedals and Pedal Straps

10

UB4 Upright Bike

ASSEMBLY - INSTRUCTIONS

Step 5 - Install Computer

Connect the Upper Computer Wire (47) and Hand Pulse Wire (48) to the 2 wires

that are on the back of the computer (15).

Attach the Computer to the Handlebar post ( 2) Using 4 – M5 x 10MM Screws (125) ( On back of Computer)

Note: Be careful not to damage or disconnect the wires when attaching the computer.

Step 6 - Install Seat

Attach Seat ( 14 ) to Seat post ( 03 ) using: 3 – M8 Flat Washer ( 88 )

3 – M8 Nyloc Nut ( 66 )

Step 7 –Install Pedals and Pedal Straps

Thread Right Pedal (8R) with an “R” onto the Right

Crank Arm ( 7 ) in a clockwise direction.

Thread Left Pedal (8L) with an “L” onto the Left

Crank Arm ( 7 ) in a counter–clockwise direction.

Step 8 – Plug the AC Adaptor

Plug the AC adaptor lead ( 95 ) into the socket at the rear end of your

Upright Bike as shown.

Plug the 6V 1000mA A.C. Adaptor into a suitable mains supply.

www.smoothfitness.co.uk