Chapter 2 Content Switching Module with SSL Commands
client (virtual server submode)
client (virtual server submode)
To restrict which clients are allowed to use the virtual server, use the client command in the SLB virtual server configuration mode. To remove the client definition from the configuration, use the no form of this command.
client
no client
Syntax Description |
| Client’s IP address. | |
|
| (Optional) Client’s IP mask. | |
|
|
|
|
|
| exclude | (Optional) Specifies that the IP address is disallowed. |
|
|
| |
|
|
|
|
Defaults |
| The default for network mask is 255.255.255.255 if the network mask is not specified. | |
|
|
| |
Command Modes |
| SLB virtual server configuration submode | |
|
|
|
|
Command History |
| Release | Modification |
|
|
|
|
|
| CSM release 1.1(1) | This command was introduced. |
|
|
|
|
|
| This command was introduced. | |
|
|
|
|
Usage Guidelines
Examples
Related Commands
The network mask is applied to the source IP address of incoming connections and the result must match the IP address before the client is allowed to use the virtual server. If exclude is not specified, the IP address and network mask combination is allowed.
This example shows how to restrict a client from using the virtual server:
advertise (virtual server submode)
ip access-list standard
show module csm vserver redirect
| Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference |
|
