Chapter 2 Content Switching Module with SSL Commands

ip address (VLAN submode)

ip address (VLAN submode)

To assign an IP address to the CSM that is used for probes and ARP requests on a VLAN, use the ip address command in the SLB VLAN configuration submode.To remove the CSM IP address and disable probes and ARP requests from the configuration, use the no form of this command.

ip address active_ip_addr netmask alt standby_ip_addr netmask

 

 

no ip address

 

 

 

 

 

Syntax Description

 

netmask

Network mask.

 

 

 

 

 

 

active_ip_addr

IP address for the active CSM; only one management IP address is

 

 

 

allowed per client or server VLAN.

 

 

 

 

 

 

standby_ip_addr

IP address for the standby CSM.

 

 

 

 

 

 

alt

Configures the alternate VLAN IP address.

 

 

 

 

 

 

 

Defaults

 

This command has no default settings.

 

 

 

Command Modes

 

SLB VLAN configuration submode

 

 

 

 

Command History

 

Release

Modification

 

 

 

 

 

 

CSM-S release 1.1(1)

This command was introduced.

 

 

 

 

 

 

CSM release 2.2.1

Increases maximum number of unique VLAN IP addresses per

 

 

 

system form 32 to 255.

CSM-S release 2.1(1)

Adds the alt keyword to specify IP address of active and standby CSM for client or server VLAN.

Usage Guidelines This command is applicable for both server and client VLANs. Up to 255 unique VLAN IP addresses are allowed per module.

Examples

This example shows how to assign an IP address to the CSM:

 

Cat6k-2(config-slb-vlan-client)#ip address 130.21.34.56 255.255.255.0

Related Commands show module csm vlan

vlan (virtual server submode)

 

 

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

 

 

 

 

 

 

OL-7029-01

 

 

2-193

 

 

 

 

 

Page 215
Image 215
Cisco Systems OL-7029-01 manual Ip address Vlan submode, No ip address, Alt, 193