2-68
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
recover (probe submode)
recover (probe submode)To set the number of consecutive responses that are sent before marking a failed server as healthy, use
the recover command.
recover recover_value
no recover
Syntax Description
Defaults The default value is 1.
Command Modes SLB probe configuration submode
Command History
Usage Guidelines This command is available for all probe types.
Examples This example shows how to configure a time to wait for a reply from a server to 5 seconds:
Router(config-slb-probe-http)# recover 5
Related Commands probe
show module csm probe
recover_value Number of consecutive responses sent; the range is from 1 to 65535.
Release Modification
CSM release 4.2(1) This command was introduced.