Cisco Systems OL-7029-01 manual Xml-config no xml-config, Client-group XML submode, 195

Chapter 2 Content Switching Module with SSL Commands

xml-config

xml-config

To enable XML for a CSM module, and then enter the XML configuration submode, use the xml-configcommand. To remove the XML configuration, use the no form of this command.

xml-config no xml-config

Defaults	This command has no default settings.
Command Modes	Module CSM configuration submode
Command History	Release	Modification
	CSM release 3.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Examples	This example shows how to display the XML configuration:
	Cat6k-2(config-module-csm)# xml-config
	Cat6k-2(config-slb-xml)#
	client-group (XML submode)
Related Commands
	credentials (XML submode)
	vlan (XML submode)

	Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01		2-195