Cisco Systems OL-7029-01 manual Virtual redirect virtual server submode, No virtual vipaddress

Chapter 2 Content Switching Module with SSL Commands

virtual (redirect virtual server submode)

virtual (redirect virtual server submode)

To specify the virtual server’s IP address, the protocol used for traffic, and the port the protocol is using, use the virtual command in SLB redirect virtual server configuration submode. To reset the virtual server to its defaults, use the no form of this command.

virtual v_ipaddress tcp port

	no virtual v_ipaddress
Syntax Description	v_ipaddress	Redirect virtual server’s IP address.
	tcp	Specifies the protocol used for redirect virtual server traffic.
	port	Port number used by the protocol.
Defaults	The default IP address is 0.0.0.0, which prevents packet forwarding.
Command Modes	SLB redirect virtual server configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Examples	This example shows how to specify the virtual server’s IP address, the protocol for redirect virtual server
	traffic, and the port number used by the protocol:
	Cat6k-2(config-slb-redirect)# virtual 130.32.44.50 tcp 80
	redirect-vserver (real server submode)
Related Commands
	show module csm vserver redirect

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

2-88 OL-7029-01