Sony CD-X1500 owner manual Remote Controller Top Panel, 0OPEN key, qSEARCH key, wP.MODE / PGM key

2-3. Remote Controller (Top Panel)

0OPEN key

Opens and closes the appropriate tray.

NOTE

…These keys cannot be used when direct mode (Preset menu) is off and a disc is being played back.

qSEARCH key

Turns on or off the Search function on the Jog wheel. When this key is lit, the Jog wheel acts as a search dial. After 5 seconds without search operation, the unit will exit the search mode automatically.

wP.MODE / PGM key

Selects the play mode, either continuous play (all play), single play (1 track play), or programmed play.

Continuous play:	No indication in the
	LCD
Single play:	SINGLE indicator in the
	LCD will light
Programmed play:	PROGRAM indicator in
	the LCD will light

Pressing and holding the TIME/ENTER/SHIFT key while pressing the P.MODE key, enters program edit mode.

eTIME/ENT / SHIFT key
Selects	the time	display	mode,		either	elapsed,
remain,	or total remain.
ELAPSED:		Elapsed		time	will	show in	the
		numerical portion in display, but no
		additional		indicator will light.
REMAIN: REMAIN indicator in the LCD will
		light
TOTAL REMAIN: The track number display area
		shows	the number of tracks of
		inserted disc, however, for 5 seconds
		in the end of track, the current track
		number flashes and for 5 seconds in
		the beginning			of	the track,	the
		current	track number lights.
Another function of this key is the modifier key
(SHIFT function). Holding SHIFT while pressing
another key performs the following functions;
SHIFT + P.MODE:			Program edit
SHIFT + FLASH:				Track memory recall
SHIFT + SET:				Track memory
SHIFT + TEMPO:			Memory bank select
SHIFT + BEND -:				Auto cue on/off
SHIFT + BEND +:				Auto ready on/off
SHIFT + TAP:				Parameter display select
SHIFT + Jog Wheel:			Preset
SHIFT + B:				Loop end point edit
SHIFT + CUE:				Select the CUE key’s
					operation

8 TASCAM CD-X1500 DUAL CD PLAYER