Chapter 2 Content Switching Module with SSL Commands
retries (probe submode)
retries (probe submode)
To set the number of failed probes that are allowed before marking the server failed, use the retries command in the SLB probe configuration submode. To reset the number of failed probes allowed before marking a server as failed to default, use the no form of this command.
retries retry-count no retries
Syntax Description |
| Number of probes to wait before marking a server as failed; the range | |
|
|
| is from 0 to 65535. |
|
|
| |
|
|
|
|
Defaults |
| The default value for retries is 3. | |
|
|
| |
Command Modes |
| SLB probe configuration submode | |
|
|
|
|
Command History |
| Release | Modification |
|
|
|
|
|
| CSM release 1.1(1) | This command was introduced. |
|
|
|
|
|
| This command was introduced. | |
|
|
|
|
Usage Guidelines
Note
Examples
Related Commands
This command is used for all probe types.
Set retries to 2 or more. If retries are set to 1, a single dropped probe packet will bring down the server. A setting of 0 places no limit on the number of probes that are sent. Retries are sent until the system reboots.
This example shows how to configure a retry count of 3:
probe
show module csm probe
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
| ||
|
