Cisco Systems OL-7029-01 manual Show ssl-proxy service name, Name Optional Service name

Chapter 3 Commands Specific to the Content Switching Module with SSL

show ssl-proxy service

show ssl-proxy service

To display information about the configured SSL virtual service, use the show ssl-proxy service command.

show ssl-proxy service [name]

Syntax Description	name	(Optional) Service name.
Defaults	This command has no default settings.

Command Modes

Command History

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and SSL Services	switches.
Module Release 1.1(1)
CSM-S release 1.1(1)	This command was introduced.

Examples	This example shows how to display all SSL virtual services that are configured on the Content Switching
	Module with SSL:
	ssl-proxy#show ssl-proxy service
	Proxy		Service Name Admin Operation Events
	status status
	S2	up	up
	S3	up	up
	S1	up	up
	S6	down down

ssl-proxy#

This example shows how to display a specific SSL virtual service that is configured on the Content Switching Module with SSL:

ssl-proxy#show ssl-proxy service S6 Service id: 0, bound_service_id: 256 Virtual IP: 10.10.1.104, port: 443 Server IP: 10.10.1.100, port: 80 Virtual SSL Policy: SSL1_PLC

rsa-general-purpose certificate trustpoint: tptest Certificate chain for new connections:

Server Certificate: Key Label: tptest Serial Number: 01

Root CA Certificate: Serial Number: 00

Certificate chain complete

Admin Status: up

Operation Status: down

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

3-38 OL-7029-01