Cisco Systems OL-7029-01 manual Script task, 100, Script name, Show module csm script

Chapter 2 Content Switching Module with SSL Commands

script task

script task

To run a standalone task, use the script task command. To remove the standalone task from the configuration, use the no form of this command.

script task 1-100 script name

no script task 1-100 script name

Syntax Description	1-100		Task ID that identifies a specific running script.
		script name	Identifies the script by name.
Defaults		This command has no default settings.
Command Modes		Module CSM configuration submode
Command History		Release	Modification
		CSM release 3.1(1)	This command was introduced.
Examples		This example shows how to run a standalone script:
		Cat6k-2(config-module-csm)# script task 30 filerun
		show module csm script
Related Commands

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-95