Chapter 2 Content Switching Module with SSL Commands
advertise (redirect virtual server submode)
advertise (redirect virtual server submode)
To allow the CSM to advertise the IP address of the virtual server as the host route, use the advertise command in the SLB redirect virtual server configuration mode. To stop advertising the host route for this virtual server, use the no form of this command.
advertise [active] no advertise
Syntax Description |
| active | (Optional) Allows the CSM to advertise the IP address of the virtual | |
|
|
| server as the host route. | |
|
|
|
| |
|
|
|
|
|
Defaults |
| The default for network mask is 255.255.255.255 if the network mask is not specified. | ||
|
|
|
| |
Command Modes |
| SLB redirect virtual server configuration submode | ||
|
|
|
|
|
Command History |
| Release | Modification |
|
|
|
|
|
|
|
| CSM release 1.1(1) | This command was introduced. | |
|
|
|
|
|
|
| This command was introduced. | ||
|
|
|
| |
|
|
|
|
|
Usage Guidelines |
| Without the active option, the CSM always advertises the virtual server IP address whether or not there | ||
|
| is any active real server attached to this virtual server. | ||
|
|
|
| |
Examples |
| This example shows how to restrict a client from using the redirect virtual server: | ||
|
| |||
|
| advertise (virtual server submode) | ||
Related Commands |
| |||
|
| show module csm vserver redirect | ||
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
| ||
|
