Cisco Systems OL-7029-01 manual Show ssl-proxy stats type, Stats

Chapter 3 Commands Specific to the Content Switching Module with SSL

show ssl-proxy stats

show ssl-proxy stats

To display information about the statistics counter, use the show ssl-proxy stats command.

show ssl-proxy stats [type]

Syntax Description	type	(Optional) Information type; valid values are crypto, ipc, pki, service, ssl,
		fdu and tcp. See the “Usage Guidelines” section for additional information.

Defaults

Command Modes

Command History

This command has no default settings.

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	The output of the show ssl-proxy stats command was changed to
Release 1.2(1)	include information about the session allocation failure and session
	limit-exceed table.
CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines The type values are defined as follows:

•crypto—Displays crypto statistics.

•ipc—Displays IPC statistics.

•pki—Displays PKI statistics.

•service—Displays proxy service statistics.

•ssl—Displays SSL detailed statistics.

•fdu—Displays FDU processor statistics.

•tcp—Displays TCP detailed statistics.

Examples		This example shows how to display all the statistics counters that are collected on the Content Switching
		Module with SSL:
		ssl-proxy#show ssl-proxy		stats
		TCP Statistics:
		Conns initiated	:	20636	Conns accepted	: 20636
		Conns established	:	28744	Conns dropped	: 28744
		Conns closed	:	41272	SYN timeouts	: 0
		Idle timeouts	:	0	Total pkts sent	: 57488
		Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
	3-40					OL-7029-01