Cisco Systems OL-7029-01 manual Ssl redirect virtual server submode, No ssl, Https, Ftp

Chapter 2 Content Switching Module with SSL Commands

ssl (redirect virtual server submode)

ssl (redirect virtual server submode)

To redirect an HTTP request to either HTTPS (SSL) or the FTP service, use the ssl command in the SLB redirect virtual server configuration submode. To reset the redirect of an HTTP request to an HTTP service, use the no form of this command.

ssl {https ftp ssl-port-number}

no ssl

Syntax Description

Defaults

https	Specifies secure HTTP service.
ftp	Specifies FTP service.
ssl-port-number	SSL port number; the range is from 1 to 65535.
HTTP service.

Command Modes	SLB redirect virtual server configuration submode
Command History	Release	Modification
	CSM release 1.1(1)	This command was introduced.
	CSM-S release 1.1(1)	This command was introduced.
Examples	This example shows how to enable SSL forwarding:
	Cat6k-2(config-slb-redirect-vs)# ssl 443
	redirect-vserver (real server submode)
Related Commands
	show module csm vserver redirect

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01 2-87