Cisco Systems OL-7029-01 manual Ssl-proxy policy tcp tcp-policy-name, Defaults are as follows

Chapter 3 Commands Specific to the Content Switching Module with SSL

ssl-proxy policy tcp

ssl-proxy policy tcp

To enter the proxy policy TCP configuration submode, use the ssl-proxy policy tcp command. In proxy-policy TCP configuration submode, you can define the TCP policy templates.

ssl-proxy policy tcp tcp-policy-name

Syntax Description	tcp-policy-name	TCP policy name.
Defaults	The defaults are as follows:

• timeout inactivity is 240 seconds.

• timeout fin-wait is 600 seconds.

• buffer-share rx is 32768 bytes.

• buffer-share tx is 32768 bytes.

• mss is 1500 bytes.

• timeout syn is 75 seconds.

• timeout reassembly is 60 seconds.

Command Modes

Command History

Global configuration

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	This command was changed to add the timeout reassembly time
Release 1.2(1)	subcommand.
CSM-S release 1.1(1)	This command was introduced.

Usage Guidelines After you define the TCP policy, you can associate the TCP policy with a proxy server using the proxy-policy TCP configuration submode commands.

Each proxy-policy TCP configuration submode command is entered on its own line.

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

3-60 OL-7029-01