Cisco Systems OL-7029-01 manual Slb-policy virtual server submode, No slb-policy policy-name, 177

Chapter 2 Content Switching Module with SSL Commands

slb-policy (virtual server submode)

slb-policy (virtual server submode)

To associate a load-balancing policy with a virtual server, use the slb-policycommand in the SLB virtual server configuration submode. To remove a policy from a virtual server, use the no form of this command.

slb-policypolicy-name [priority priority_value]

	no slb-policy policy-name
Syntax Description	policy-name	Policy associated with a virtual server.
	priority priority_value	(Optional) Specifies the order in which the policy is to be executed.
		Valid values for priority_value are 1 (highest priority) through
		12,287.
Defaults	This command has no default settings.
Command Modes	SLB virtual server configuration submode
Command History	Release	Modification
	CSM-S release 1.1(1)	This command was introduced.
	CSM-S release 2.1(1)	The priority keyword was introduced.

Usage Guidelines

Note

Examples

Related Commands

Multiple load-balancing policies can be associated with a virtual server. URLs in incoming requests are parsed and matched against policies defined in the same order in which they are defined with this command. The policy name must match the name specified in a previous policy command.

If priority priority_value is not entered, policies are executed in the order in which they are entered. In this case, you should enter the highest priority policy first.

This example shows how to associate a policy with a virtual server:

Cat6k-2(config-slb-vserver)#slb-policy COOKIE-POLICY1 priority 2

advertise (virtual server submode) policy

show module csm owner

show module csm vserver redirect

	Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01		2-177