CONFIGURING YOUR ROUTER
simultaneous access to the router (for the Internet, for example) using a single dynamic IP address.
NOTE: If 1 to 1 Dynamic is selected, the router must be locked by the user before Internet access is permitted and released after closing the connection. Select lock or release from the toolbar, the Router menu, or from a
Static Client IP Address: If 1 to 1 Static IP Address Translation is selected, then you must type the IP address of the computer or device getting access to the router. Reset of the router is required when enabling this option.
WAN IP Assignment: This needs to be setup if you selected either 1 to 1 Dynamic or 1 to Many. Some ISPs (Internet Service Providers) use dynamic IP address assignment for which a different IP address can be assigned with each connection. If this is the case with your ISP, the option Assigned should be selected with no Wan IP address entered. Other ISP's use a fixed Wan IP address dedicated to your account. In this case, you should set the Wan IP address option to Fixed and type in the dedicated Wan IP address.
WAN IP Address: If WAN IP Assignment is set to Fixed then you must enter the WAN IP Address here.
55
