Ringdale ISDN user manual Power Reset 10baseT 10base2

INSTALLING the OverLAN ROUTER

Task 4: Connect the router through an NT-1 into the ISDN phone jack.

Step 1:

Connect one end of the RJ45 cable into the BRI port on the back of the router -- see figure 6.

CAUTION:

Be careful that you DO NOT CONNECT this cable to the 10BASE-T port shown in the 10BASE-T Method in Task 1.

Back of Router

BRI Port

(ISDN Line)

Power Reset 10baseT 10base2

RJ45 cable

NT-1

connect to

Refer to the instructionsS/T interface of NT-1 included with your NT-1,

an ISDN unit you purchase separately

Figure 6

Step 2:

Connect the other end of the cable to the S/T interface on the NT-1-- see figure 6.

Task 4 is continued on the next page.

11