Ringdale ISDN user manual Allow the main flash to be upgraded

CONFIGURING YOUR ROUTER

Add Button: Select this button to add the specified address from the IP Address data field above to the list of Additional Addresses to Monitor.

Delete Button: Select this button to remove an address from the list of Additional Addresses to Monitor. Click on an address in the list and then select this button to delete the address from the list.

Allow the main flash to be upgraded

Select this option to allow the main flash EEPROM of the router to be upgraded with new firmware. For more information, see Upgrade Router.

Show Advanced Diagnostics for Routers

Select this option to enable a line diagnostics troubleshooting tool in OverLAN Commander. Once enabled, close the Router. Properties dialog box. Then, reselect the router. When reselected, the Router Properties dialog box will include tabs for Advanced Diagnostics and ISDN Trace. These features are provided primarily to help Technical Support at Ringdale to determine the operating condition of the router.

Re-transmission Timeout (Sec)

This is the time in seconds that the router will wait for a response from the device it is calling before attempting to re-transmitt to the device. Generally, 1 second should be sufficient for most devices. However, sometimes a setting of 2 seconds can help to compensate for a congested network or a slow device. In extreme cases, even 3 or 4 seconds could be necessary. If you must set this option to more than 4 seconds, you may want to inquire to the associated Network Administrator, ISDN Provider, or telephone company about whether or not there is an excessively congested ISDN phone switch or some other similar kind of problem that needs attention.

68