Ringdale ISDN Using OverLAN Commander 32/IP, Disclaimer, Select a Router, Initialize the Router

CONFIGURING YOUR ROUTER

Using OverLAN Commander 32/IP

To establish a communications link with a remote router or another communications device, use the following instructions.

Disclaimer

Due to the varieties and complexities of networks and applications, it is the responsibility of the network administrator to determine the cost of all line charges, or any other charges which may be incurred, resulting from the use of the OverLAN Ethernet/ISDN router. Such charges are not the responsibility of Ringdale.

Step 1: Select a Router

Select a router from the Routers part of OverLAN Commander. To select a router you must double-click on the name or icon of the router. When a router has been selected, a dialog box of Router Properties will appear.

Step 2: Initialize the Router

If the selected router is a new router or if it has been moved onto a another network recently, you may need to initialize the router. If the router requires initialization, a Router Initialization dialog box will appear (shown below) instead of the Router Properties dialog box. Once initialized, the Router Properties dialog box will appear.

23