CONFIGURING YOUR ROUTER
cost of all line charges, or any other charges which may be incurred, resulting from the use of the OverLAN Ethernet/ISDN router. Such charges are not the responsibility of Ringdale.
Local Switch Type: Select the type of ISDN phone service for the location of the selected router. For routers in the USA, select National ISDN 1. For routers in Germany, select ETSI (Variant). For routers in other European countries, select ETSI. For any other country (or if you are unsure of the type of ISDN phone service or the location of the selected router), use the default setting for this option. The default setting is ETSI. If this option is set incorrectly, the selected router may not be able to communicate with the phone switch and, thus, may not be able to make or receive calls.
Local Phone number (B1): Enter the ISDN phone number for the selected router. If the ISDN line for the router has two ISDN phone numbers, type the phone number that corresponds to channel B1 here.
SPID (B1): A SPID number may be needed if you set Local Switch Type to National ISDN 1. You should consult the ISDN Provider to find out if a SPID number is required. Type the ISDN SPID number for the selected router. If there are two ISDN SPID numbers for the router, type the SPID number corresponding to Router phone #1 here.
Local Phone Number (B2): If the selected router has only one ISDN phone number, type that number again here. If the selected router has two ISDN numbers, type the second ISDN phone number here. Router phone #2 should correspond to channel B2.
SPID (B2): A SPID number may be needed if you set Local Switch Type to National ISDN 1. You should consult the ISDN Provider to find out if a SPID number is required. If the selected router has only one ISDN SPID number, then type that number
43
