CONFIGURING YOUR ROUTER

For OverLAN routers, the Peer Name and Peer Password for the remote router must correspond to the Unit Name and Unit Password for the selected router.

For routers or devices of other manufacturers, you must be sure that the remote device settings correspond correctly with the settings on the OverLAN router. Refer to the instructions included with the remote device for additional information.

Step 9: Setup Send PAP Authentication.

The default of Send PAP Authentication is off.

Send PAP Authentication: Enabling Send PAP Authentication makes the selected router transmit its Peer Name and Peer Password to the remote router or device it is calling. If Send PAP Authentication is enabled and the remote device does not support PAP, the remote device may hang-up the call or only give limited access.

PAP Peer Name and PAP Peer Password: This is the name and password to be supplied to the remote device. Peer Name and Peer Password should be no more than 10 letters and/or numbers. If one or both of these fields are left blank and Send PAP Authentication is enabled, then the selected router will send a blank ID and/or password to the remote device.

For OverLAN routers, the Peer Name and Peer Password for the selected router must correspond to the Unit Name and Unit Password for the remote router.

For routers or devices of other manufacturers, you must be sure that the remote device settings correspond correctly with the settings on the OverLAN router. Refer to the instructions included with the remote device for additional information.

83

Page 83
Image 83
Ringdale ISDN user manual Setup Send PAP Authentication