English

Connecting up – Do not turn on the power until the connection is complete –

Connection

 

 

Connecting antennas

Connecting AM loop antenna (supplied)

1Set up the AM loop antenna.

Connecting FM antenna (supplied)

Main unit

(rear panel)

FM antenna

FM75

COAXIAL

Put the antenna up straight in the direction where the best radio reception can be obtained, and fix by using tape.

2Connect antenna cords.

Main unit

(rear panel)

AM

EXT

AM

LOOP

How to insert antenna cords

Connect two antenna cords as described above.

If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off and remove.

7When good radio reception cannot be obtained with the supplied antenna or when using a communal antenna

3Turn the AM loop antenna to the direction of the best radio reception.

Locate the AM loop antenna as far away from the main unit as possible.

Do not locate the AM loop antenna on a metallic table or close to a TV, personal computer, etc. Otherwise it may result in bad radio reception.

7When good radio reception cannot be obtained with the supplied AM loop antenna

Electric wire: 3 - 5 m (commercially available)

Electric wire

Put up an electric

 

Twist

wire extending

horizontally,

 

Main unit

(rear panel)

FM75

COAXIAL

Antenna cord (not

Communal

supplied)

antenna terminal

or

Outdoor FM antenna

 

(commercially

 

available)

Converter

Coaxial cable

(commercially

(sold separately:

available)

compatible with 300/ 75)

Depending on the radio reception conditions, an FM feeder antenna (sold separately: compatible with 300) can be used. In the case, a converter (not supplied) is required.

AM loop

preferably at a high

antenna

place such as

 

above a window or

AM

outdoors.

 

EXT

 

AM

 

LOOP

 

For details of connecting a separately sold antenna, refer to the user guide for the antenna or converter.

Main unit

Connect the AM loop

antenna cords together.

(rear panel)

 

When positioning the antenna, listen to an actual radio program (refer to “Listening to a radio broadcast” on page 32).

8

Page 56
Image 56
JVC GVT0142-001A manual Connection, Set up the AM loop antenna