Setting the Various Timer (continued) | Convenient functions |
How the daily timer works
Once the daily timer has been set, the timer indicator and timer number indicator (1/2/3) are lit on the display window. Daily timer turns on the system at the same time everyday until the timer setting is canceled manually or another daily timer is activated.
When the on-time comes:
The system turns on, tunes in to the last received station or start playback the loaded disc with the volume level set to the preset level.
About one hour after the playback starts, the system stops it, and turns off (stand by) automatically.
•The timer setting remains in memory until you can change it.
•Without canceling the daily timer, you can change the source or adjust the volume after the daily timer starts playback.
1 Press CLOCK/TIMER repeatedly to show “DAILY1.”
•Each time you press the button, the clock setting changes as follows:
Source
indication 
DAILY1
Clock adjust |
| ON AM 6:00 | ||
|
|
|
|
|
ON PM 6:00 |
| DAILY2 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DAILY3 |
| ON PM 12:00 | ||
| ||||
2 Press cursor 3/2 to adjust the hour of the
3 Press cursor 3/2 to adjust the minute of the
4 Repeat step 2 and 3 to set the
5 Press cursor 3/2 to select the playback source, then SET.
•Each time you press the button, the clock setting changes as follows:
AUX 
TUNER FM
DISC 
TUNER AM
•When selecting the tuner, press cursor 3/2 to select a preset channel.
6 Press cursor 3/2 to adjust the volume level, then SET.
7 Turn off the system.
To turn off the timer setting
1 Press CLOCK/TIMER repeatedly to select the timer setting.
2 Press CANCEL to turn off the selected setting.
•Pressing SET activates the timer setting again.
Auto Standby
If there is no operation for 3 minutes while the disc is stopped, the power will be automatically turned off.
Press A.STANDBY during playback or while the disc is stopped, or no disc is loaded (“NO DISC” appears).
The A.STANDBY indicator lights on the display window on the main unit.
When a stopped state is entered (after playback is finished, for example), the A.STANDBY indicator starts blinking.
This means that the power will be turned off automatically if there is no operation for 3 minutes. And, 10 seconds before the power is turned off, “A.STANDBY” starts flashing.
Releasing Auto Standby
Press A.STANDBY.
“A.STANDBY” will be turned off on the display window on the main unit.
NOTE
When the source is FM, AM or AUX, Auto Standby does not work.
35
