Omega RD100B manual Specifying the Timer Used in Statistical Calculations Tlog

9.6Specifying the Timer Used in Statistical Calculations (TLOG)

On channels that perform statistical calculation (TLOG), the timer for determining the interval is specified. The sum scale is also specified when using statistical calculation. The timer is also used for the periodic printout of computed values.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Math and then press the key.

3.Press the key or SHIFT + key to select TLOG and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

6.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=			Math
	Math=			TLOG
								Set the channel range.
			CH=		0A	-0A
		First channel Last channel						Select the timer number (Periodic, 1, or 2).
			Timer No=				Periodic

	SUM scale=Off	Select the sum scale.
ESC/?	0A-0A Channel	The new setting takes effect.
	Setting complete

9

Operations Related to the Computation Function (/M1 Option)

9-13