Omega RD100B manual Dot model

9.9Turning Trend Recording (Dot Model) and Periodic Printout ON/OFF for Each Channel

This section explains the details of setting the trend recording and periodic printout for each computation channel.

The following settings can be entered for each channel on the dot model.

•Turn trend recording ON/OFF.

•Turn the printing of computed values ON/OFF during periodic printout. The following setting can be entered for each channel on the pen model.

•Turn the printing of computed values ON/OFF during periodic printout.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Math and then press the key.

3.Press the key or SHIFT + key to select Aux and then press the key.

4.Press the key or SHIFT + key to select Print out and then press the key.

5.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

6.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

7.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=			Math
	Math=			Aux
			Aux=Print out
								Set the channel range.
			CH=		0A	-0A
		First channel Last channel						Turn trend recording On/Off
			Trend=				On
								(dot model).

	Periodic=On	Select whether to print the computed
		values during periodic printout and
		printout using the TLOG timer (On/Off).
	0A-0A Channel	The new setting takes effect.
ESC/?	Setting complete

9

Operations Related to the Computation Function (/M1 Option)

9-17