Omega RD100B manual Setting the Constants Used in Equations

9.4 Setting the Constants Used in Equations

This section explains the details of setting constants to be used in computing equations.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Math and then press the key.

3.Press the key or SHIFT + key to select Constant and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

6.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=Math

Math=Constant

No.=K01

Select the constant number.

		Set the value.
K01=	1

ESC/?

K01

Setting complete

The new setting takes effect.

Explanation

Constant

Up to 30 constants can be registered. Enter the values as K01 to K30 in the equations. Set the constants in the range shown below. The maximum number of significant digits is 5.

–9.9999E+29 to –1.0000E–30, 0, 1.0000E–30 to 9.9999E+29

9-10