3.4 Installing/Replacing the Ribbon Cassette (Dot Model)

7.Install a new ribbon cassette.

First, insert the right-hand part and then the left-hand part into the cassette holder. Check that the cassette is properly engaged with the cassette holder tab.

If inserting the ribbon cassette is difficult, turn the ribbon feeding knob in the direction of the arrow to align the ribbon feeding shaft of the cassette with the ribbon feeding shaft hole of the holder.

Cassette holder

Holder tab

Hole for the ribbon

 

feed shaft

 

Ribbon feeding knob

 

8.Turn the ribbon feeding knob in the direction of the arrow a half turn or more to check that the ribbon is feeding properly. If the ribbon is loose, turn the knob in the direction of the arrow to tighten it.

9.Return the display and key panel section to its original position, and press the

( CH UP ) key.

The screen returns to the data display screen.

3-10

Page 68
Image 68
Omega RD100B manual Installing/Replacing the Ribbon Cassette Dot Model, Cassette holder