5.3 Setting the Unit on Scaled Channels

Units are set on channels whose input range is set to Scaling, 1-5V, or SQRT.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Unit and then press the key.

3.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

4.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

5.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=Unit

CH=01-01

First channel Last channel

Unit=

01-01 Channel

ESC/? Setting complete

Explanation

Characters That Can Be Used for Units

Set the channel range.

Set the unit.

The new setting takes effect.

A unit is set using up to six characters.

The available characters are as follows:

Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), , , 2, 3, .), and space

5-12

Page 106
Image 106
Omega RD100B manual Setting the Unit on Scaled Channels, First channel Last channel