Omega RD100B manual Display Function Specifications, Display and Displayed Contents

12.4 Display Function Specifications

Display and Displayed Contents

This section explains the specifications of the display functions of measurement channels and computation channels (/M1 option). Display examples are illustrations used to explain the displayed contents and differ in appearance from the actual displays.

Item	Specifications
Display	VFD (101 ⋅ 16, dot matrix)
	Up to 11 characters using large fonts. 17 characters ⋅ 2 lines using normal fonts.
Number of screens	15 (switched using keys)
Displayed information
Display type	1-channel digital display
	2-channel digital display
	4-channel digital display
	6-channel digital display (dot model)
	1-channel digital + 1-channel bar graph
	1-channel digital + 4-channel bar graph (pen model)
	2-channel digital + 2-channel bar graph
	4-channel bar graph (pen model)
	6-channel bar graph (dot model)
	Flag display
	Channel alarm status display
	Date, time, and chart speed display
	DI/DO status display
	1-channel digital display (tag display)
	2-channel digital display (tag display)
	1-channel digital + 1-channel bar graph (tag display)
	1-channel digital + 4-channel bar graph (tag display) (pen model)
	Status display
	System display
	Lights off
	Skip
	Multiple display

The following screens can be assigned arbitrarily to the top and bottom sections of the display. 1-channel digital display

2-channel digital display Date/Time

Chart speed display Channel alarm status display Status display

Lights off

1-channel digital display (tag display)

Display update of measured values / computed values When displayed channels are fixed

Dot model: Updated at the scan interval

Pen model: Updated every 2 s

When displayed channels are automatically switched

Switches the channel and measured values at 1, 2, 3, 4, or 5 second intervals.

Status display
RECORD	This indicator turns ON when recording is started and turns OFF when stopped.
ALARM	The indicator turns ON when an alarm occurs and turns OFF when the alarm is released.
	If the alarm indication is set to hold operation, the indicator blinks when an alarm occurs. When
	alarm ACK operation is performed, the indicator turns ON or OFF.
MATH	This indicator turns ON when computation on the computation function (/M1 option) is started and
	turns OFF when stopped.
KEYLOCK	This indicator turns ON when key lock is activated and turns OFF when released.
CHART END	This indicator turns ON when the remaining amount of chart paper falls to approximately 2 cm on
	models with the FAIL/chart end detection and output function (/F1 option).

12

Specifications

12-7